Features
Sony's Xplod amps combine form and function in a mix that'll make your system look and sound great. On the outside, the sleek inverted heat sink keeps vital internal components running cooler and lasting longer. Removable terminal covers keep all the wire connections protected and out of sight for a clean-looking installation.
110W x 4 Max Power into 4 Ohms
150W x 2 (at 2 Ohms) + 300W x1 (at 4 Ohms) Max Power
60W x 2 RMS into 4 Ohms
65W x 4 RMS into 2 Ohms
High Level Sensing Power On
80Hz High Pass filter with -12dB/Octave Slope
80Hz Low Pass Filter with -18dB/Octave Slope
MOSFET Power Supply
RCA & speaker level inputs
Line level thru-put
CEA-2006 Power Compliant
Specifications
Audio
Circuit System : OTL Output Transformerless Circuit
Pulse Power Supply
Frequency Response : 5-50kHz (+0/-3 dB)
Harmonic Distortion : 0.005% or less (at 1kHz, 4 Ohms)
Input Level : Adjustment Range: 0.3-6.0V (RCA Pin Jacks)
Input Level : Adjustment Range: 2.8-12.0V (High Level Input)
Band : 80Hz High Pass filter with -12dB/Octave Slope
Band : 80Hz Low Pass Filter with -18dB/Octave Slope
Inputs and Outputs
Audio In : RCA Pin Jacks
Audio In : High Level Input Connector
Audio Out (Variable/Fixed) : Speaker Terminals
Audio Out (Variable/Fixed) : Through Out Pin Jacks
Power
Current Drain : 33A @ 60W x 4 into 4 Ohms
Output Power : Maximum Output: 110W x 4 at 4 Ohms
Output Power : Maximum Output: 150W x 2 (at 2 Ohms) + 300W x 1 (at 4 Ohms)
Rated Output : 60W x 4 RMS (20Hz-20kHz, 1.0% THD + N, at 4 Ohms)
Rated Output : 65W x 4 RMS (20Hz-20kHz, 0.1% THD + N, at 2 Ohms)
Power Requirements : 12V DC Car Battery (Negative Ground)
Input Voltage : 10.5-16V Power Supply Voltage
Speaker
Impedance : 4-8 Ohms when used as a bridging amplifier
Impedance : 2-8 Ohms in Stereo Mode